Garden tools and maintenance of common sense

Garden tool use and maintenance knowledge:

1 fuel four stroke gasoline engine for clean gasoline lubricating oilfor four stroke engine oil SAE30. 2 hours of new machine idle running, engineoil change before normal use. When a total of 30 hours in normal use oil changed every work. Before and after each use to check the oil level.

The continuous working 2 four stroke air-cooled gasoline engines, the crankshaft box temperature should not exceed 90 degrees, overheatingshutdown when 15 to 20 minutes after the can continue to work. The fuel fillermust be carried out in the cold state. Cooler should be running at low speedfor 3 minutes after normal use, don't long time use maximum throttle when notmow the lawn.

3 gasoline engine is not running. In emergency situations, should stop at low speeds.

4 oil to correctly, genuine, cleaner, gasoline to clean, fresh.

5 non professional personnel shall not adjust the carburetor. We must adjustthe oil needle, generally clockwise tighten, then counterclockwise screw 1.5 to 1.75 weeks.

The 6 air cleaner element should always check, wash with soap and water orregular replacement.

7 gasoline engine running 100 to 300 hours after application of wood or bamboo, removal of coke a. Remove the cylinder head clearance, clearance of cylinder, cylinder head, piston, valve attached to the carbon deposition.Carbon is not allowed to enter the cylinder hole and the valve seat.

8 keep gasoline engine especially cylinder fins clean.

The 9 gas, inspection, repair, maintenance, to pull off the spark plug cap,don't smoke, away from the fire.

10 not in indoor operation. When the machine in addition to the operator, the irrelevant personnel leave the machine more than 15 meters.

11 the machine before and after each use check working parts and other parts of the tightness of the bolts.

12 clutch, clutch exposed before which machines are not installed, not starting gasoline engine.

Other parts of the lubrication of the machine 13, according to the need tofollow the instructions to add the lubricating oil or grease.